Generic Parameters
| Machine shall be suitable for Disposal of Municipal Waste such as PET bottle, Alunimium cans, by shredding |
Yes |
| Cutting mechanism |
material grabbed between two counter rotating shaft |
| Shredding capacity in kg/hr |
7 |
| Shredding speed in rpm |
6 |
| Input electrical supply |
230 V 50 Hz, Single phase |
| Electrical motor rating |
1 HP |
| Current Rating in Amperes |
10 |
| Motor Start /off |
Automatic |
| Noise level at 1 meter distance when working in dB |
65 |
| Machine should be covered with Powder coated steel enclosure to avoid spillage of waste |
Yes |
| Machine should be tested for electrical safety requirment as per IS 302 /Part I |
Yes |
| Warranty in years |
2 |
| Machine should be installed and demonstrated before acceptance |
Yes |
| Operating and ,Maintanance Manual to be provided should be supplied |
Yes |
| Size of the shredder chamber in mm x mm (with tolerance of plus minus 10 mm) |
240 x 240 |
| Material of the cutter of shredder |
Hardened Special Alloy Steel |
| Feed opening in mm x mm |
100 x 150 |
| Waste bin capacity in Litres |
100 |
| Overall dimensions of machine |
1400x470x530mm |
| Gross weight of machine in kg |
85 |
| Material of body |
Mild Steel |
| Door open cut off switch |
Yes |
| Motor should be trips off incase of waste loading lid is open |
Yes |
| Short circuit protection |
Yes |
